Strength-HVI Vs. Stelometer
Emerson E. Tucker and Dale L. Shaw |
560 |
A Status Report on the Advisory Committee on Cotton Classing and Marketing
H.L. Lewis |
560 |
Some Relationships of Fiber Quality Characteristics to Yarn Strength of Acala Cottons
Dick Bassett |
561 |
HVI Strength Measurements: Levels and Stability
S.R. Griffith |
563 |
Revised HVI Software Calibration Compensates for Inherent Variability in Cotton Standards
Hossein Ghorashi and Geoffrey Wilde |
566 |
Factors That Affect the HVI Bundle Force Measurement
Roger S. Brown, Luther C. Godbey, and Robert A. Taylor |
572 |
Integration of the IIc-Shirley FMT.3 with HVI and its Effects on Strength Calculations
Russell J. Crompton |
577 |
Cotton Maturity: Implications and Measurements
Devron P. Thibodeaux |
580 |
Some Experimental Results Obtained with the Arealometer
Charles B. Landstreet and Catherine M. Waggoner |
582 |
A Look at the New FMT III Fineness and Maturity Instrument as a Candidate for Use in High Volume Instrument Systems
Harvin R. Smith and John B. Price |
583 |
Evaluation of Trashmeters in Cotton Classing
Harmon H. Ramey, Jr. |
585 |
Video Scan Trashmeter Area Calibration
Robert A. Taylor and Luther C. Godbey |
586 |
Cotton Trash Analysis and Modern Imaging Techniques
M.A. Lieberman |
591 |
Measurement of Trash in Cotton Gins with Video Cameras
W. Stanley Anthony |
603 |
Relationship Between Short Fiber Content and the HVI Length Parameters
M.I. Zeidman, S.K. Batra, and P.E. Sasser |
605 |
The Mass Fibrogram a Method for Increased Precision in Measuring Short Fiber Content and Uniformity Ratios with Scanning Instruments
Charles B. Landstreet, Catherine M. Waggoner and Gus N. Guggenheim |
610 |
The Analysis of Mechanical and Thermal Properties Contributing to Fabric Hand
H. Barndt and F. Zeglen |
612 |
Harvesting Practices to Reduce Bark
James R. Supak, Alan D. Brashears, and William F. Lalor |
614 |
Bale Selection for Barky Cotton Spinning Test
Dale L. Shaw |
615 |
A Comparison of the Spinning Performance of Cotton Containing Various Levels of Bark
John B. Price and Dale L. Shaw |
619 |
The Effect of Carding on Removal of Bark from Cotton
C.K. Bragg and C.L. Simpson |
626 |
How Dead Cotton Affects the Quality of Dyed Fabric
David M. Pittman |
628 |
The Significance of Raw Cotton Color on Dyeing and Finishing
Tod A. Waldrop, C.D. Rogers and J.R. Aspland |
629 |
Measurement of Cottonseed-Fragment Contamination
J.D. Bargeron and T.H. Garner |
630 |
Cotton Color Grades and Fiber Quality as Related to Fabric Dyeability
Oscar Hinojosa and Devron P. Thibodeaux |
|
A Report on the Partial Evaluation of the Spinlab HVI Line: Strength I
Richard Krowicki and Devron P. Thibodeaux |
|
The Importance of Measuring Difficult to Remove Impurities in Cotton Samples: An Entire Industry at Stake
James R. Supak, Alan D. Brashears, and William F. Lalor |
|
NIR Spectroscopy Method Development for Determining Cotton Maturity and Fineness
Joseph Montalvo, Sherman Faught, and Steven M. Buco |
|
The Analysis of near Infrared Reflectance Spectra for Cotton Maturity and Fineness
Steve M. Buco and Joseph Montalvo |
|
Determination of Short Fiber Content and Fiber Diameter Distributions
Gordon F. Williams, David A. Hinkle, Frederick N. Shofner, and C.K. Bragg |
|
Analysis of Factors Influencing Ring-Spun Yarn Tenacities for a Long Staple Cotton: Part Ib. Determination of Fiber Length Acting in Each Yarn
Lloyd Deluca, Brent Smith, and William T. Waters |
|
Multivariate Single Fiber Measurements: Strength and Elongation
Frederick M. Shofner, Christopher K. Shofner, and Preston E. Sasser |
|
