Note: You are reading this message either because you can not see our css files, or because you do not have a standards-compliant browser.

LOGO: Journal of Cotton Science

 

Issue 3 Table of Contents

Measuring moisture content in cotton accurately, precisely and reproducibly is essential for proper moisture management. This begins with modules delivered to the gin, through ginning and continues through bale production and storage.

FEATURED ARTICLE


Engineering and Ginning
COTTON GINNERS HANDBOOK
Moisture Measurement
Mathew G. Pelletier, and Rick K. Byler
Pages: 121-130
DOI: (https://doi.org/10.56454/TIGG3482)
Measuring moisture content in cotton accurately, precisely and reproducibly is essential for proper moisture management. This begins with modules delivered to the gin, through ginning and continues through bale production and storage.

 Issue Editors
Agronomy and Soils
Irrigation and Planting Geometry Effects on Cotton (Gossypium hirsutum L.) Yield and Water Use
Srinivasa R. Pinnamaneni, Saseendran S. Anapalli, Daniel K. Fisher, and Krishan N. Reddy
Pages: 87-96
DOI: (https://doi.org/10.56454/QOWP3595)

Agronomy and Soils
Evaluation of Cover Crop Species Termination Timing Prior to Cotton Production in Mississippi
Savana D. Denton, Darrin M. Dodds, L. Jason Krutz, Jac J. Varco, Jeffrey Gore, and Tyson B. Raper
Pages: 97-103
DOI: (https://doi.org/10.56454/ZCQL1443)

Agronomy and Soils
Making the Cotton Replant Decision: A Novel and Simplistic Method to Estimate Cotton Plant Population from UAS-calculated NDVI
Shawn Butler, Tyson B. Raper, Mike Buschermohle, Liem Tran, and Lori Duncan
Pages: 104-111
DOI: (https://doi.org/10.56454/CDKG1931)

Breeding and Genetics
Upland Cotton (Gossypium hirsutum L.) Fuzzy-Seed Counting by Image Analysis
Matthew T. Herritt, Don C. Jones, Alison L. Thompson
Pages: 112-120
DOI: (https://doi.org/10.56454/YHKD3150)

Engineering and Ginning
COTTON GINNERS HANDBOOK
Moisture Measurement
Mathew G. Pelletier, and Rick K. Byler
Pages: 121-130
DOI: (https://doi.org/10.56454/TIGG3482)

Engineering and Ginning
COTTON GINNERS HANDBOOK
ERRATA
Gin Process Control
Mathew G. Pelletier, Carlos B. Armijo, Paul A. Funk, John C. Fabian, and Robert G. Hardin IV
Pages: 131-136


Engineering and Ginning
Influence of Seeding Rate, Planter Downforce and Cultivar on Crop Emergence and Yield in Singulated and Hill-Dropped Cotton
Simerjeet S. Virk, Wesley M. Porter, John L. Snider, Jared R. Whitaker, Glen C. Rains, and Changying C. Li
Pages: 137-147
DOI: (https://doi.org/10.56454/WRJS4850)